Printashrink Eco (FLAT)
Actions
Printashrink Eco (FLAT) is a flattened continuous 2:1 shrink ratio heatshrink polyolefin offering good print performance and mark permanence. It is zero halogen, has a working temperature of 105⁰C and is available in black, white and yellow up to 50.8mm ID as standard. It can be cut and printed as required.
This zero halogen, high quality, cost effective commercial grade of heatshrink sleeve has been flattened ready for printing and is compatible with most printers. It is a low cost solution ideal for identification and marking on many and varied commercial and industrial applications, and is ideal where a low shrink temperature is an important factor. We offer our full range of printing and cutting services on this high strength, resilient tube making it perfect for branding and marking requirements.
Technical Data
- Shrink Ratio: 2:1
- Shrink Temperature: >90⁰C
- Operating Temperature: -30⁰C - +105⁰C
- Flame Retardant: Yes
- Colours:
- Black,
- white,
- yellow,
- (others to order)
- Sizes: 2.4 - 50.8
- Packing: Reels, mini-packs, cut to length, kits, cut sleeves
- Print: Yes, full range of text and logos
- Approvals: ASTM D 638, 2671, 570, 792, 257, AMS-DTL-744, 23053/5, FMVSS302, RoHS Compliant
- Applications / Industries:
| Properties | Typical Values | Test Methods |
|---|---|---|
| General | ||
| Operating Temperature | -30⁰C - +105⁰C | |
| Minimum shrink temperature | >90⁰C | |
| Shrink Ratio | 2:1 | |
| Physical | ||
| Tensile Strength | 10N/mm² | ASTM D 638 |
| Ultimate elongation | 200% | ASTM D 638 |
| Specific gravity | 1.4g/cm³ | ASTM D 792 |
| Longitudinal change | ≤+5% ≤-5% | ASTM D 2671 |
| Water absorption | ≤+0.15% | |
| Thermal | ||
| Flammability | Pass | FMVSS302 |
| Heat shock (4hrs) | No dripping, cracking or flowing | |
| Low temperature flexibility (4hrs @ -55°C) | No cracking | ASTM D 2671C |
| Heat ageing (168hrs) | at 150⁰C, elongation 250% | ASTM D 638 |
| Electrical | ||
| Dielectric strength | 20kV/mm² | ASTM D 2671 |
| Volume resistivity | 10¹⁴Ωcm | ASTM D 257 |
| Chemical | ||
| Chemical resistance | Good | AMS-DTL-23053/5 |
| Copper corrosion | No corrosion | ASTM D 2671B |
| Fungus resistance | No growth | AMS-DTL-7444 |
Free Artwork service
As part of the fully comprehensive print process, we offer a free artwork service.
Enquire Now
Cable Identification Service
We offer a complete service based on our many years of experience and development in this highly specialised field.
Enquire Now
You might also be interested in
Printing
Printing
Thermal Printing
Printed to your specification, we supply large or small runs of pre-printed sleeving, markers and labels which meet with commercial, industrial, military and mass transit standards and are packed ready for use.
Non-adhesive Polyolefin - Commercial - 125˚C or Under
Non-adhesive Polyolefin - Commercial - 125˚C or Under
Printashrink TW
2:1 shrink ratio, thin wall, flexible heatshrink polyolefin tubing with a low shrink temperature. It is a low cost solution ideal available in a full range of colours across the sizes.
